Siemens sinumerik 840D sl Operating Manual page 65

Relative actual value
Note
The new actual value is only displayed. The relative actual value has no effect on the axis
positions and the active work offset.
The softkey is only available if the relevant machine data is set.
Turning
Operating Manual, 07/2010, 6FC5398-8CP40-0BA0
1. Press the "REL actual values" softkey.
2. Enter the axis positions and press the "Input" key.
Machine manufacturer
Please refer to the machine manufacturer's specifications.
Setting up the machine
2.4 Settings for the machine
65