Deleting A Block - Siemens sinumerik 840D sl Operating Manual

Teaching in a program

11.7 Deleting a block

11.7 Deleting a block
You have the option of deleting a program block entirely.
Requirement
"AUTO" mode: The program to be processed is selected.
Proceed as follows
516
1. Select the "Machine" operating area.
2. Press the <AUTO> or <MDA> key.
3. Press the <TEACH IN> key.
4. Press the "Teach prog." softkey.
5. Click the program block to be deleted.
6. Press the ">>" and "Delete block" softkeys.
The program block on which the cursor is positioned is deleted.
Operating Manual, 07/2010, 6FC5398-8CP40-0BA0
Turning