Program Views - Siemens sinumerik 840D sl Operating Manual

Creating G code program

6.2 Program views

6.2 Program views
You can display a G code program in various ways.
● Program view
● Parameter screen, either with help screen or graphic view
Program view
The program view in the editor provides an overview of the individual machining steps of a
program.
Figure 6-1
170
Program view of a G code program
In the program view, you can move between the program blocks using
the <Cursor up> and <Cursor down> keys.
Operating Manual, 07/2010, 6FC5398-8CP40-0BA0
Turning