10.8
Defining and activating user data
By editing a DEF/MAC file, you can alter or delete existing definition/macro files or add new
ones.
Proceed as follows
Turning
Operating Manual, 07/2010, 6FC5398-8CP40-0BA0
1.
Select the "Startup" operating area.
2.
Press the "System data" softkey.
3.
In the data tree, select the "NC data" folder and then open the
"Definitions" folder.
4.
Select the file you want to edit.
5.
Double-click the file.
- OR -
Press the "Open" softkey.
- OR -
Press the <INPUT> key.
- OR -
Press the <Cursor right> key.
The selected file is opened in the editor and can be edited there.
6.
Define the desired user data.
7.
Press the "Exit" softkey to close the editor.
10.8 Defining and activating user data
User data
503