9.5
Display / edit the multi-channel functionality in the "Machine"
operating area
9.5.1
Running-in a program
You have various options to run-in programs.
Running-in channel-by-channel
Select the channels that you wish to process using the "Running-in" function in the "Program
control" window. The channels not selected here are brought into the "Program test (PRT)"
state. As a consequence, the channels are only calculated, but are not processed.
No M and auxiliary functions or tool functions are output. Spindle commands are only output
for selected spindles.
Running-in spindle-by-spindle
Only machining operations are executed for a spindle selected under program control /
running-in. When programming, using the block formation, allocate the corresponding
machining operations to a spindle.
When generating a block, a complete block can be assigned to a spindle. For the case that
the block is not executed, as the specified spindle cannot be processed, then save a so-
called "running-in – supplementary code"
Precondition
● Multi-channel machine
● You have selected the multi-channel view via "Settings for channel functionalities".
Procedure
Turning
Operating Manual, 07/2010, 6FC5398-8CP40-0BA0
9.5 Display / edit the multi-channel functionality in the "Machine" operating area
Software options
You require the "programSYNC" option for cross-channel program control.
1.
Select the "AUTO" operating area.
2.
Press the "Prog. ctrl." softkey.
The "Program control - General" window appears on the screen.
3.
Press the "Run-in" softkey.
The "Program control - Running-in" window is displayed.
4.
Select the channels and the associated spindles to run-in the
program.
Multi-channel support
489