Tool Alignment For Turning - Siemens sinumerik 840D sl Operating Manual

Working with a B axis

12.2 Tool alignment for turning

12.2 Tool alignment for turning
The input fields for the β and γ angles for aligning the tool are available in the tool screen
and in all turning screen.
β angle
In the entry field "β" you have the possibility of selecting the main alignment of the tool:



Programming when machining with a counterspindle
When machining on the counterspindle, it is programmed in exactly the same way as the
main spindle.
The direction display of the arrows depends on the settings.
γ angle
In the entry field "γ" you have the possibility of selecting the main alignment of the tool:
● 0°
● 180°
● Free entry field to enter the required angle
522
: β = 0°
: β = 90°
Empty : The required angle can be freely entered
Machine manufacturer
Please refer to the machine manufacturer's specifications.
- or -
Machine manufacturer
Please refer to the machine manufacturer's specifications.
Operating Manual, 07/2010, 6FC5398-8CP40-0BA0
Turning