Siemens sinumerik 840D sl Operating Manual page 597

Turning
Operating Manual, 07/2010, 6FC5398-8CP40-0BA0
Enter the program name directly in the list.
If you are making entries manually, check that the path is correct (e.g.
//NC/WKS.DIR/MEINPROGRAMM.WPD/MEINPROGRAMM.MPF).
//NC and the extension (.MPF) may be added automatically.
With multi-channel machines, you can specify in which channel the
program is to be selected.
6. To remove a program from the list, place the cursor on the appropriate
line and press the "Delete" softkey.
- OR -
To delete all programs from the program list, press the "Delete all"
softkey.
14.4 Creating a directory/program/joblist/program list
Program management
597