Programming graphics
The programming graphics show the contour of the workpiece as a dynamic graphic with
dotted lines. The program block selected in the process plan is highlighted in color in the
programming graphics.
Figure 7-2
Parameter screen with help display and programming graphics
Turning
Operating Manual, 07/2010, 6FC5398-8CP40-0BA0
Programming graphics of a ShopTurn program
1.
Press the <Cursor right> or <Input> key in order to open a
selected program block or cycle in the process plan.
The associated parameter screen with help screen is then
displayed.
2.
Press the "Graphic views" softkey.
The programming graphics of the selected program block is
displayed.
Creating a ShopTurn program
7.2 Program views
193