Siemens sinumerik 840D sl Operating Manual page 275

Parameters Description
Face Y:
Z0 Z coordinate of the reference point (abs)
CP Positioning angle for machining area
X0 X coordinate of the reference point – first position (abs)
Y0 Y coordinate of the reference point – first position (abs)
α0 Angle of rotation of line in relation to the X axis
(only for
Positive angle: Line is rotated counterclockwise.
ShopTurn)
Negative angle: Line is rotated clockwise.
Peripheral surface C:
X0 Cylinder diameter ∅ (abs)
Y0 Y coordinate of the reference point – first position (abs)
Z0 Z coordinate of the reference point – first position (abs)
α0 Angle of rotation of line with reference to Y axis
(only for
Positive angle: Line is rotated counterclockwise.
ShopTurn)
Negative angle: Line is rotated clockwise.
Peripheral surface Y:
X0 X coordinate of the reference point (abs)
C0 Reference point
Y0 Y coordinate of the reference point – first position (abs)
Z0 Z coordinate of the reference point – first position (abs)
α0 Angle of rotation of line with reference to Y axis
(only for
Positive angle: Line is rotated counterclockwise.
ShopTurn)
Negative angle: Line is rotated clockwise.
L0 Distance of 1st position to reference point - (for line position pattern only)
L Distance between positions - (for line position pattern only)
N Number of positions - (for line position pattern only)
αX Shear angle X - (for grid or frame position pattern only)
αY Shear angle Y - (for grid or frame position pattern only)
L1 Distance between columns - (for grid or frame position pattern only)
L2 Distance between lines - (for grid or frame position pattern only)
N1 Number of columns - (for grid or frame position pattern only)
N2 Number of lines - (for grid or frame position pattern only)
Turning
Operating Manual, 07/2010, 6FC5398-8CP40-0BA0
Programming technology functions (cycles)
8.1 Drilling
Unit
mm
Degrees
mm
mm
Degrees
mm
mm
mm
Degrees
mm
Degrees
mm
mm
Degrees
mm
mm
Degrees
Degrees
mm
mm
275