Siemens sinumerik 840D sl Operating Manual page 146
Turning
Hide thumbs
Also See for sinumerik 840D sl:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
Machining the workpiece
4.12 Displaying the program runtime and counting workpieces
Procedure
See also
Entering the number of workpieces (Page 215)
146
1.
Select the "Machine" operating area.
2.
Press the <AUTO> key.
3.
Press the "Times, Counter" softkey.
The "Times, Counter" window opens.
4.
Select "Yes" under "Count workpieces" if you want to count completed
workpieces.
5.
Enter the number of workpieces needed in the "Desired workpieces"
field.
The number of workpieces already finished is displayed in "Actual
workpieces". This value can be corrected if necessary.
After the defined number of workpieces is reached, the current
workpieces display is automatically reset to zero.
Operating Manual, 07/2010, 6FC5398-8CP40-0BA0
Turning
Advertisement
Table of Contents
