Siemens sinumerik 840D sl Operating Manual page 85

Parameter
ZC1
Endpiece type
ZC3
ZS3
ZE3
XR
ZR
Turning
Operating Manual, 07/2010, 6FC5398-8CP40-0BA0
Description
Main spindle chuck dimensions (inc)
Dimensions of the forward edge or stop edge
Jaw type 1

Jaw type 2

Chuck dimension, counter-spindle (inc) - only for a counter-spindle that has been
set-up
Stop dimension, counter-spindle (inc) - only for a counter-spindle that has been
set-up
Jaw dimension, counter-spindle (inc) - only for a counter-spindle that has been
set-up and "Jaw type 1"
Tailstock diameter - only for tailstock that has been set-up
Tailstock length - only for tailstock that has been set-up
Setting up the machine
2.8 Monitoring axis and spindle data
Unit
mm
mm
mm
mm
mm
mm
85