Siemens sinumerik 840D sl Operating Manual page 24

Introduction
1.2 Operator panel fronts
Key
24
Function
+ <Cursor up> + <SHIFT>
In the program manager and in the program editor, selects a
contiguous selection of directories and program blocks.
<Cursor down>
 Editing box
 Navigation
+ <Cursor down> + <CTRL>
 Moves the cursor in a table to the end of the table.
 Moves the cursor to the end of a window.
+ <Cursor down> + <SHIFT>
In the program manager and in the program editor, selects a
contiguous selection of directories and program blocks.
<SELECT>
In selection drop down list boxes and in selection boxes,
switches between several specified options.
Activates check boxes.
In the program editor and in the program manager, selects a
program block or a program.
<END>
Moves the cursor to the last entry field in a window or in a
table.
+ <END> + <SHIFT>
Moves the cursor to the last entry.
+ <END> + <CTRL>
Moves the cursor to the last entry in the last line of the actual
column.
Moves the cursor downwards.
– Moves the cursor in a table to the next cell downwards.
– Moves the cursor in a window downwards.
Operating Manual, 07/2010, 6FC5398-8CP40-0BA0
Turning