Siemens sinumerik 840D sl Operating Manual page 126

Machining the workpiece
4.8 Intervening in the program sequence
Activating program control
You can control the program sequence however you wish by selecting and clearing the
relevant check boxes.
Display / response of active program controls:
If a program control is activated, the abbreviation of the corresponding function appears in
the status display as response.
Procedure
See also
Setting for automatic mode (Page 147)
126
1. Select the "Machine" operating area.
2. Press the <AUTO> or <MDA> key.
3. Press the "Prog. ctrl." softkey.
The "Program control" window appears.
Operating Manual, 07/2010, 6FC5398-8CP40-0BA0
Turning