Siemens sinumerik 840D sl Operating Manual page 148

Machining the workpiece
4.13 Setting for automatic mode
References
840D sl Programming Manual Measuring Cycles
Note
The feedrate can be changed while the operation is running.
See also
Program control (Page 125)
148
5. Enter the desired percentage in the "Reduced rapid traverse RG0"
field.
RG0 has not effect if you do not change the specified amount of
100%.
6. Enter "Automatic" in the "Display measurement result" box if the
measurement result window should be automatically opened, or
"Manual", if the measurement result window should be opened by
pressing the "Measurement result" softkey.
Operating Manual, 07/2010, 6FC5398-8CP40-0BA0
Turning