Synchronizing Programs - Siemens sinumerik 840D sl Operating Manual

...
...
Shifting blocks
You have the option of using "Select", "Copy", "Cut-out" and "Paste" softkeys to move
individual or several blocks within the program.
9.3.4

Synchronizing programs

Using the synchronized view, you have the possibility of obtaining an overview of the time
sequence of a program. In this case, program instructions are evaluated to coordinate
channels and are arranged in parallel in the editor view.
As a result of the synchronized view of the programs, you can easily identify at which
locations the programs are synchronized in the various channels.
Synchronizing commands
Commands
START
WAITM
WAITMC
WAITE
SETM
CLEARM
GET
RELEASE
Turning
Operating Manual, 07/2010, 6FC5398-8CP40-0BA0
1. Position the cursor on the desired program block.
2. Press the <+> key or the <Cursor right> key.
The block is opened.
3. Press the <-> key or the <Cursor left> key.
The block is closed again.
Meaning
Starts another program
Sets a mark and waits for the specified channels (with exact stop)
Sets a mark and waits for the specified channels (without exact stop)
Waits for the end of program of the specified channels
Sets a mark
Clears a mark
Fetches an axis
Releases an axis
Multi-channel support
9.3 Multi-channel editor
481