Creating A New G Code Program - Siemens sinumerik 840D sl Operating Manual

Hide thumbs Also See for sinumerik 840D sl:

Table of Contents

Program management

14.4 Creating a directory/program/joblist/program list

Creating a new G code program

You can create G code programs and then render G code blocks for them in a

directory/workpiece.

Select the "Program Manager" operating area.

Select the desired storage location and position the cursor on the

folder, in which you would like to store the program.

Press the "New" softkey.

The "New G Code Program" window opens.

If necessary, select a template if any are available.

Select the file type (MPF or SPF).

If you are in the NC memory and have selected either the

"Subprograms" or "Part Programs" folder, you can only create one

subprogram (SPF) or one main program (MPF).

Enter the desired program name and press the "OK" softkey.

Program names may be a maximum of 24 characters in length.

You can use all letters (with the exception of special characters,

language-specific special characters, Asian or Cyrillic characters),

numbers and underscores (_).

Operating Manual, 07/2010, 6FC5398-8CP40-0BA0

Sinumerik 828d