HT 8
16.3 Machine control panel menu
Softkeys on the machine control panel menu
Available softkeys:
"Machine" softkey
"[VAR]" softkey
"1... n CHANNEL"
softkey
"Single Block"
softkey
"WCS MCS"
softkey
"Back" softkey
Note
The window will automatically disappear when changing regions areas with the "Menu
Select" key.
630
Select the "Machine" operating area
Select the axis feedrate in the variable increment
Change the channel
Switch single block execution on/off
Switch between WCS and MCS
Close the window.
Operating Manual, 07/2010, 6FC5398-8CP40-0BA0
Turning