2-Window - Siemens sinumerik 840D sl Operating Manual

Hide thumbs Also See for sinumerik 840D sl:

Table of Contents

2-window

Changing the display

You can increase or decrease the size of the simulation graphic and move it, as well as

change the segment.

Operating Manual, 07/2010, 6FC5398-8CP40-0BA0

Start the simulation.

Press the "Additional views" and "2-window view" softkeys.

The 2-window view contains a side view (left-hand window) and a front

view (right-hand window) of the workpiece. The viewing direction is

always from the front to the cutting surface even if machining is to be

performed from behind or from the back side.

Simulating a machining operation

5.5 Different views of a workpiece

Sinumerik 828d