Siemens sinumerik 840D sl Operating Manual page 429

Turning
Hide thumbs Also See for sinumerik 840D sl:
Table of Contents

Advertisement

Procedure
Parameters
Description
T
Tool name
D
Cutting edge number
F
Feedrate
S / V
Spindle speed or
constant cutting rate
Chipbreaking
Machining
Stock removal
Z0
Reference point Z
Drilling depth
Referred to
Shank
The drill is inserted until the drill shank reaches the value programmed for Z1. The
angle entered in the tool list is taken into account.
Tip
The drill is inserted until the drill tip reaches the value programmed for Z1.
Z1
Final drilling depth X (abs) or final drilling depth in relation to Z0 (inc)
D
Maximum depth infeed
FD1
Percentage for the feedrate for the first infeed
Percentage for each additional infeed or
DF
Amount for each additional infeed
DF = 100: Infeed increment remains constant
DF < 100: Infeed increment is reduced in direction of final drilling depth.
Example: DF = 80
Last infeed was 4 mm;
4 x 80% = 3.2; next infeed increment is 3.2 mm
3.2 x 80% = 2.56; next infeed increment is 2.56 mm, etc.
V1
Minimum depth infeed
Parameter V1 is available only if DF<100% has been programmed.
A minimum infeed is programmed using parameter V1.
V2
Retraction distance after each machining step – (only for "chipbreaking" operation)
Turning
Operating Manual, 07/2010, 6FC5398-8CP40-0BA0
1.
The ShopTurn program to be edited has been created and you are in
the editor.
2.
Press the "Drilling" and "Drill centric" softkeys.
The "Drilling centered" input window opens.
Programming technology functions (cycles)
8.7 Further cycles and functions ShopTurn
Unit
mm/min
mm/rev
rpm
m/min
%
%
mm
429

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sinumerik 828d

Table of Contents