Creating A Program Block - Siemens sinumerik 840D sl Operating Manual

Multi-channel support
9.3 Multi-channel editor
Parameter Description
SC Safety clearance (inc)
Acts in relation to the reference point. The direction in which the safety clearance is
active is automatically determined by the cycle.
S1 Maximum speed, main spindle
Machining Milling direction:
direction
Climbing

Conventional

Empty

Procedure
9.3.3.4

Creating a program block

In order to structure programs in order to achieve a higher degree of transparency when
preparing for the synchronized view, you have the possibility of combining several blocks (G
code and/or ShopTurn machining steps) to form program blocks.
Structuring programs
● Before generating the actual program, generate a program frame using empty blocks.
● By forming blocks, structure existing G code or ShopTurn programs.
478
1. The ShopTurn program has been created.
2. Position the cursor on the program header.
3. Press the "Various" and "Settings" softkeys.
The "Settings" input window opens.
Operating Manual, 07/2010, 6FC5398-8CP40-0BA0
Unit
mm
rev/min
Turning