Displaying And Editing Nc/Plc Variables - Siemens sinumerik 840D sl Operating Manual

Turning
Hide thumbs Also See for sinumerik 840D sl:
Table of Contents

Advertisement

20.6

Displaying and editing NC/PLC variables

The "NC/PLC Variables" window enables the monitoring and modification of NC system
variables and PLC variables.
You receive the following list in which you enter the desired NC and PLC variables in order
to display the actual values.
● Variable
● Comment
● Format
● Value
Procedure
Turning
Operating Manual, 07/2010, 6FC5398-8CP40-0BA0
Address for NC/PLC variable.
Faulty variables have a red background and # is displayed in the Value column.
Arbitrary comment on the variables.
The column can be shown or hidden.
Specification of the format in which the variable is to be displayed.
The format can be permanently defined (e.g. floating-point).
Display of the current value of the NC/PLC variable.
1.
Ladder add-on tool is opened.
2.
Press the "NC/PLC variables" softkey.
The "NC/PLC Variables" window appears.
Ladder Viewer and Ladder add-on (828D only)
20.6 Displaying and editing NC/PLC variables
661

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sinumerik 828d

Table of Contents