Working in manual mode
3.1
General
Always use "JOG" mode when you want to set up the machine for the execution of a
program or to carry out simple traversing movements on the machine:
● Synchronize the measuring system of the controller with the machine (reference point
● Set up the machine, i.e. activate manually-controlled motions on the machine using the
● You can activate manually controlled motions on the machine using the keys and
Turning
Operating Manual, 07/2010, 6FC5398-8CP40-0BA0
approach)
keys and handwheels provided on the machine control panel.
handwheels provided on the machine control panel while a part program is interrupted.
3
93