Parameters, G code program
PL
Machining plane
Parameters
Description
TC
Name of swivel data set
No: No retraction before swiveling
Retract
- (only for G
Z: Retraction in the direction of machine axis Z
code)
Z, X, Y: Move machining axis to retraction position before swiveling
Tool direction, max.: Maximum retraction (up to the software end position) in the
tool direction
Tool direction, inc.: Retraction, incremental (up to the software end position) in the
tool direction
When retracting in the tool direction, in the swiveled machine state, several axes
can move (travel).
ZR
Retraction path - (only for incremental retraction in the tool direction)
New: New swivel plane
Swivel plane
- (only for G
Additive: Additive swivel plane
code)
RP - (only for
Retraction plane for face B
ShopTurn)
C0 - (only for
Position angle for machining surface
ShopTurn)
X0
Reference point for rotation X
Y0
Reference point for rotation Y
Z0
Reference point for rotation Z
axis-by-axis: Swivel coordinate system axis-by-axis
Swivel mode
Solid angle: Swivel via solid angle
Proj. angle: Swiveling via projection angle
Direct: Position rotary axes directly
Axis sequence
Sequence of the axes which are rotated around - (only for axis-by-axis swivel mode)
XYZ or XZY or YXZ or YZX or ZXY or ZYX
X
Rotation around X
Y
Rotation around Y
Z
Rotation around Z
Projection
Position of the projection in space - (only for swivel mode, projection angle)
position
Xα, Yα, Zβ or Yα, Zα, Zβ or Zα, Xα, Zβ
Xα
Projection angle
Yα
Projection angle
Zβ
Angle of rotation in the plane
Z
Angle of rotation in the plane
Turning
Operating Manual, 07/2010, 6FC5398-8CP40-0BA0
Programming technology functions (cycles)
Parameters, ShopTurn program
T
Tool name
D
Cutting edge number
F
Feedrate
S / V
Spindle speed or constant
cutting rate
- (only for axis sequence)
- (only for projection position)
8.6 Further cycles and functions
mm/min
mm/rev
rpm
m/min
Unit
Degrees
Degrees
Degrees
Degrees
Degrees
Degrees
Degrees
Degrees
mm
419