Drilling (Cycle82) - Siemens sinumerik 840D sl Operating Manual

Turning
Hide thumbs Also See for sinumerik 840D sl:
Table of Contents

Advertisement

Programming technology functions (cycles)
8.1 Drilling
8.1.3

Drilling (CYCLE82)

Function
With the "Drilling" function, the tool drills with the programmed spindle speed and feedrate
down to the specified final drilling depth (shank or tip).
The tool is retracted after a programmed dwell time has elapsed.
Approach/retraction
1. The tool moves with G0 to safety clearance of the reference point.
2. The tool is inserted into the workpiece with G1 and the programmed feedrate F until it
3. When a dwell time DT expires, the tool is retracted at rapid traverse G0 to the retraction
Procedure
Parameters, G code program
PL
Machining plane
RP
Retraction plane
SC
Safety clearance
Parameters
Description
Single position
Machining
position
(only
Drill hole at programmed position
for G code)
Position pattern
Position with MCALL
Z0 (only for G
Reference point Z
code)
254
reaches the programmed final depth Z1.
plane.
1.
The part program or ShopTurn program to be processed has been
created and you are in the editor.
2.
Press the "Drilling" softkey.
3.
Press the "Drilling Reaming" softkey.
4.
Press the "Drilling" softkey.
The "Drilling" input window opens.
mm
mm
Parameters, ShopTurn program
T
Tool name
D
Cutting edge number
F
Feedrate
S / V
Spindle speed or constant
cutting rate
Operating Manual, 07/2010, 6FC5398-8CP40-0BA0
mm/min
mm/rev
rpm
m/min
Unit
mm
Turning

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sinumerik 828d

Table of Contents