Management Port Ipv6 - TP-Link T3700G-28TQ User Manual

The following entries are displayed on this screen:
IPv4 Protocol Configuration

IPv4 Protocol:
DHCP Client-ID:
IP Address:
Subnet Mask:
Gateway:
IPv4 Address List

Select:
IPv4 Protocol:
IP Address:
Subnet Mask:
Gateway:
Status:

4.1.7 Management Port IPv6

The Management Port is a dedicated Ethernet port for out-of-band management of the device.
Traffic on this port is segregated from operational network traffic on the switch ports and
cannot be switched or routed to the operational network. Use this page to configure IPv6
network information on the management port.
Choose the menu System → System Info → Management Port IPv6 to load the following page.
Specify IPv4 Address allocate mode of the management port.
None: Setup manually.

DHCP: Allocated through DHCP.

The DHCP Client-ID (Option 61) is used by DHCP clients to
specify their unique identifier. This value is expected to be
unique for all clients in an administrative domain.
Specify the IP address of the interface when the
Management Port Configuration Protocol is None.
Specify the Subnet Mask of the interface when the
Management Port Configuration Protocol is None.
Specify the Gateway of the interface when the Management
Port Configuration Protocol is None.
Select the interfaces to modify or delete.
Specify IPv4 Address allocate mode of the management port.
None: Setup manually.

DHCP: Allocated through DHCP.

Specify the IP address of the interface when the
Management Port Configuration Protocol is None.
Specify the Subnet Mask of the interface when the
Management Port Configuration Protocol is None.
Specify the Gateway of the interface when the Management
Port Configuration Protocol is None.
Displays interface current working status: up or down.
23