Tacacs+ Server Config - TP-Link TL-SL5428E User Manual

Gpvt{"Fguetkrvkqp<"
"
Ugtxgt"KR<"
Ujctgf"Mg{<"
Cwvj"Rqtv<"
Ceev"Rqtv<"
Tgvtcpuokv<"
Vkogqwv<"
350906" VCECEU-"Ugtxgt"Eqphki"
This page is used to configure the authentication servers running the TACACS+ security protocols.
Choose the menu Pgvyqtm"Ugewtkv{→CCC→VCECEU-"Eqpkhi to load the following page.
Eqphkiwtcvkqp"Rtqegfwtg<"
"
Configure the TACACS+ server's IP and other relevant parameters under the Server Config.
View, edit and delete the configured TACACS+ servers in the Server list.
Gpvt{"Fguetkrvkqp<"
"
Ugtxgt"KR<"
Ujctgf"Mg{<"
Vkogqwv<"
Rqtv<"
Enter the IP of the server running the RADIUS secure protocol.
Enter the shared key between the RADIUS server and the switch.
The RADIUS server and the switch use the key string to encrypt
passwords and exchange responses.
Specify the UDP destination port on the RADIUS server for
authentication requests.
Specify the UDP destination port on the RADIUS server for
accounting requests.
Specify the number of times a request is resent to a server if the
server does not respond.
Specify the time interval that the switch waits for the server to reply
before resending.
Figure 13-4 TACACS+ Server Config
Enter the IP of the server running the TACACS+ secure protocol.
Enter the shared key between the TACACS+ server and the switch.
The TACACS+ server and the switch use the key string to encrypt
passwords and exchange responses.
Specify the time interval that the switch waits for the server to reply
before resending.
Specify the TCP port used on the TACACS+ server for AAA.
226