Ip Address-Alloc Dhcp; Ip Address-Alloc Bootp - TP-Link TL-SG5428 Cli Reference Manual

Parameter
ip-addr —— The system IP of the switch. The default system IP is 192.168.0.1.
ip-mask —— The Subnet Mask of the switch. The default Subnet Mask is
255.255.255.0.
gateway —— The Default Gateway of the switch. By default, it is empty.
Command Mode
Interface Configuration Mode (interface vlan)
Example
Configure the system IP as 192.168.0.69 and the Subnet Mask as
255.255.255.0 when the management VLAN of the switch is VLAN1:
TL-SG5428(config)# interface vlan 1
TL-SG5428(config-if)# ip address 192.168.0.69 255.255.255.0

ip address-alloc dhcp

Description
The ip address-alloc dhcp command is used to enable the DHCP Client
function. When this function is enabled, the switch will obtain IP from DHCP
server. This command should be configured in the Interface Configuration Mode
of the management VLAN.
Syntax
ip address-alloc dhcp
Command Mode
Interface Configuration Mode (interface vlan)
Example
Enable the DHCP Client function when the management VLAN of the switch is
VLAN1:
TL-SG5428(config)# interface vlan 1
TL-SG5428(config-if)# ip address-alloc dhcp

ip address-alloc bootp

Description
The ip address-alloc bootp command is used to enable the BOOTP Protocol.
When the BOOTP Protocol is enabled, the switch will obtain IP address from
114