Table of Contents
Advertisement
3. Safety information
Read these instructions for use carefully. It is part of the unit and must be available at all
times.
For your own safety and that of your patients, and in accordance with the requirements of
Directive 93/42/EEC, please observe the following points:
General
•
Always carry out a functional check before using the unit
(see "10. Function check" on page 115).
•
Please observe the section "9. Hygienic preparation" on page 109 in
order to avoid infection or bacterial contamination.
Warning!
•
Risk of injury. Only use MEDUMAT Transport if you are a qualified
medical professional and have received training in respiration
techniques. Improper use may lead to serious physical injury.
•
Risk of injury. Never leave the patient or the ventilator unattended during
ventilation. Only then can you respond quickly if the patient's condition
deteriorates or in the event of an alarm or malfunction. Delayed response
on the part of medical personnel may lead to serious physical injury.
•
Risk of injury from deactivated alarm LED, deactivated acoustic alarm
output and darkened display in NVG mode!
The alarms are barely perceptible as a result of the deactivated alarm
LED, the deactivated acoustic alarm output and the darkened display in
NVG mode. This can injure the patient.
•
Only use MEDUMAT Transport for the designated purpose
(see "2.1 Intended use" on page 21).
•
MEDUMAT Transport is not suitable for hyperbaric use (pressure
chamber).
•
The unit is not licensed for use in explosive atmospheres. The unit must
not be used in combination with flammable gases or anesthetics.
•
The unit is not licensed for use in poisonous atmospheres.
•
Only operate the unit in a contaminated atmosphere with a hygiene in-
put filter.
EN
Safety information
24
– Always monitor the patient during ventilation.
– Only use the NVG option in the military sector.
Advertisement
Table of Contents
