Table of Contents
Advertisement
7.6 Audio/Video
EN
Main menu
90
This menu can be used to set the display brightness, alarm
volume, and alarm LED:
• Display brightness: Here you can set the display bright-
ness for day colors, night colors, and in NVG mode sep-
arately.
• Alarm volume: Here you can set the volume of all the
alarms. If the alarm volume is set to <50%, the
bol appears in the display and the
measurement fields. It is only possible to set the alarm
volume to <50% if the menu item Allow 0% audio vol-
ume has been activated in the operator menu (see "8.6
User Settings" on page 105).
Notice:
If you set the alarm volume to <50%, the device's alarm
function no longer complies with the EN 60601-1-8
and EN 794-3/EN 10651-3 standards.
• Alarm LED: You can activate or permanently deactivate
the alarm LED here. The alarm LED can only be activat-
ed/deactivated if the menu item Allow alarm LED off
has been activated in the operator menu (see "8.6 User
Settings" on page 105).
Notice:
If you deactivate the alarm LED, the device's alarm func-
tion no longer complies with the EN 60601-1-8 and
EN 794-3/EN 10651-3 standards.
You can make the following settings:
Parameters
Brightness/Day
Brightness/Night
symbol in the
Setting range
10% - 100%
10% - 100%
sym-
Advertisement
Table of Contents
