Table of Contents
Advertisement
Emergency Mode
Vt/kg body weight
Allow patient height entry
Allow gas type selection
Hygiene input filter installed
In this menu item you can specify the IPPV or BiLevel + ASB
mode as the emergency ventilation mode.
In this menu item you can set the tidal volume per kilo-
gram of body weight. This value is a variable used to con-
vert the body height to a tidal volume (see "14.8
Calculation of body weight on the basis of body height"
on page 152).
Here you can select a value between 4 ml/kg body weight
and 10 ml/kg body weight.
This menu item enables you to activate or deactivate the
"Height" function. If the "Height" function is activated,
you can set the body height under the "New patient"
function prior to starting the ventilation (see 5.2, page 41
and 14.8, page 152).
This menu item enables you to activate or deactivate the
"Compressed gas supply" function. You can select the
type of pressurized gas in the main menu (see 7.7,
page 91).
This menu item enables you to activate or deactivate the
"Hygiene input filter" function in the "Options" menu.
This function is only available if the hygiene input filter is
installed. If you are using a hygiene input filter having pre-
viously used one, you must reset the counter for the hy-
giene input filter service life in the "Options" menu (see
"7.7 Options" on page 91).
Operator menu
EN
107
Advertisement
Table of Contents
