Table of Contents
Advertisement
Controls of MEDUMAT Transport
11Function buttons for
emergency ventilation
10 Context-dependent control knobs
1, 3, 5 Context-dependent function button
These buttons are used to set various ventilation
parameters, depending on the ventilation mode
selected.
2 Alarm mute button with LED
You can silence these acoustic alarms temporarily
(for 2 minutes) by pressing this button briefly
(< 1 s). If alarms are muted, the LED lights up.
Visual alarms are still displayed. The alarm menu
opens if this button is held depressed for longer
(> 2 s).
4 Function button for main menu
This button calls up the main menu.
6 Function button for 100% O
This button calls up the 100% O
tilate the patient briefly (for 2 minutes) with
100% O
(FiO
= 1.0).
2
2
7 Function button for inspiratory O
concentration
This button calls up the O
The required inspiratory O
respiratory gas can be set in this menu.
EN
Overview
6
2
function to ven-
2
2
concentration menu.
2
concentration in the
2
1 Context-dependent
2 Alarm mute button with
3 Context-dependent
4 Function button for
5 Context-dependent
6 Function button for
7 Function button for
9 Navigation knob
8 On/Standby/Off button
A short press switches the unit on and off. A long
press switches it off completely.
9 Navigation knob
For navigating in menus and confirming your set-
tings on the unit. During ventilation, this knob is
to set the I:E ratio.
10 Context-dependent control knobs
For setting various parameters, depending on
which ventilation mode is active. Settings made
here must be confirmed with the Navigation
knob.
11 Function buttons for emergency
ventilation
These buttons start emergency ventilation. By
pressing the buttons, preset parameters for in-
fants, children or adults are activated.
function button
LED
function button
main menu
function button
100% O
2
inspiratory O
2
concentration
8 On/Standby/Off
button
Advertisement
Table of Contents
