Table of Contents
Advertisement
Parts
Velcro strap with clip
Oxygen fittings
Elbow
Cleaning
– Rinse with water
and mild soap
– Wash at 30°C in
the washing
machine (without
spinning)
With a dry or moist
cloth: use clean
water
In hot water with a
mild household
detergent
(1) After disinfecting, rinse all parts thoroughly with drinking
water and then leave them to dry. Follow the instructions on
hygienic preparation of the BiCheck flow sensor (see "9.4
BiCheck flow sensor" on page 110).
(2) Thermal disinfection in a washer
(3) Steam sterilization at 134°C with devices which comply with
EN 285; holding time up to 18 minutes.
(4) Material is autoclavable up to 121°C.
(5) Follow the instructions on hygienic preparation of the
BiCheck flow sensor (see "9.4 BiCheck flow sensor" on
page 110).
Disinfection
30°C washing cycle,
Immersion
with the addition of
(1)
disinfection
a suitable
disinfectant
Not permitted
Not permitted
Immerse in
Washing cycle up to
®
gigasept FF
(new)
95°C
(1)
solution
Hygienic preparation
Thermo-
Sterili-
disinfector
zation
Not
permitted
Not
permitted
Steam ster-
(2)
ilization
EN
(4)
113
Advertisement
Table of Contents
