Table of Contents
Advertisement
1. To call up a specific page of the operator menu, turn
the navigation knob until the required page is dis-
played.
2. Press the navigation knob.
The first menu item of the selected page is highlighted
in blue.
3. In order to call up a menu item on a page, turn the nav-
igation knob until the selection bar is on the required
menu item.
4. Press the navigation knob.
The required menu item is highlighted in green.
5. To change a value, turn the navigation knob until the
required value is displayed.
6. Press the navigation knob.
The changed value is highlighted in blue and saved.
Additional functions are also available on some pages
of the operator menu. These are necessary for the indi-
vidual device setting steps and are described in greater
detail in the corresponding sections of this chapter.
7. To exit a selected page, turn the navigation knob until
the selection bar is on BACK.
8. Press the navigation knob.
You can now call up another page in the operator
menu.
9. To exit the operator menu, press and hold the On/
Standby/Off button until the alarm LED stops flashing.
The device is switched off.
Operator menu
EN
97
Advertisement
Table of Contents
