Table of Contents
Advertisement
Export/import presets or screenshots
EN
Operator menu
102
To export presets or screenshots from MEDUMAT Trans-
port, proceed as follows:
1. Select the "File Import/Export" page in the operator
menu.
2. Insert a USB stick in the USB port of the device.
Caution!
Only USB sticks which conform to the USB standard 2.0
should be inserted in the USB port. Otherwise the oper-
ation of the unit might be disrupted, putting the patient
at risk.
Notice:
When you export the presets for a device, the password
for the operator menu is also exported. When the set-
tings are imported to another device, the other device
also adopts this password. If you do not wish to adopt
the customer-specific password for the operator menu,
you have two options:
• Before the export: Reset the password to "0000"
and export the presets
• After the import: Set the password to "0000"
before exiting the operator menu
3. Select the "Export" field of the data record you wish to
export and confirm your selection.
If the export is successful, "exported" appears in the
line of the exported data record.
4. Select BACK and confirm your selection.
5. Remove the USB stick from the device.
Follow the corresponding procedure when importing data
onto the device.
Advertisement
Table of Contents
