Binary Input; Binary Output; A.5.2 Binary Input - Siemens SIPROTEC 7SJ62 Manual

Appendix
A.5 Default Settings
A.5.2

Binary Input

Table A-4
Binary Input
BI1
BI2
BI3
BI4
BI5
Table A-5
Binary Input
BI6
BI7
BI8
BI9
BI11
BI12
A.5.3

Binary Output

Table A-6
Binary Output
BO1
BO2
BO3
Table A-7
Binary Output
BO4
BO7
616
Binary input presettings for all devices and ordering variants
Default function Function No.
>BLOCK 50-2 1721
>BLOCK 50N-2 1724
>Reset LED 5
>Light on
>52-b 4602
52Breaker
>52-a 4601
52Breaker
Further binary input presettings for 7SJ641/2/5/7
Default function Function No.
Disc.Swit.
Disc.Swit.
GndSwit.
GndSwit.
>CB ready
>DoorClose
Further Output Relay Presettings for all 7SJ62
Default function Function No.
Relay TRIP 511
52Breaker
52Breaker
79 Close 2851
52Breaker
79 Close 2851
Further Output Relay Presettings for 7SJ62
Default function Function No.
Failure Σ I
162
Fail I balance 163
Fail V balance 167
Fail Ph. Seq. I 175
Fail Ph. Seq. V 176
Relay PICKUP 501
Description
>BLOCK 50-2
>BLOCK 50N-2
>Reset LED
>Back Light on
>52-b contact (OPEN, if bkr is
closed)
52 Breaker
>52-a contact (OPEN, if bkr is open)
52 Breaker
Description
Disconnect Switch
Disconnect Switch
Ground Switch
Ground Switch
>CB ready Spring is charged
>Door closed
Description
Relay GENERAL TRIP command
52 Breaker
52 Breaker
79 - Close command
52 Breaker
79 - Close command
Description
Failure: Current Summation
Failure: Current Balance
Failure: Voltage Balance
Failure: Phase Sequence Current
Failure: Phase Sequence Voltage
Relay PICKUP
SIPROTEC, 7SJ62/64, Manual
C53000-G1140-C207-2, Release date 01.2008