Siemens SIPROTEC 7SJ62 Manual page 38

Functions
2.1 General
Addr. Parameter
142 49
143 66 #of Starts
144 LOAD JAM PROT.
150 27/59
154 81 O/U
161 25 Function 1
162 25 Function 2
163 25 Function 3
164 25 Function 4
170 50BF
171 79 Auto Recl.
172 52 B.WEAR MONIT
180 Fault Locator
181 L-sections FL
182 74 Trip Ct Supv
190 RTD-BOX INPUT
38
Setting Options
Disabled
No ambient temp
With amb. temp.
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
ASYN/SYNCHRON
SYNCHROCHECK
Disabled
ASYN/SYNCHRON
SYNCHROCHECK
Disabled
ASYN/SYNCHRON
SYNCHROCHECK
Disabled
ASYN/SYNCHRON
SYNCHROCHECK
Disabled
Enabled
enabled w/ 3I0>
Disabled
Enabled
Disabled
Ix-Method
2P-Method
I2t-Method
Disabled
Enabled
1 Section
2 Sections
3 Sections
Disabled
2 Binary Inputs
1 Binary Input
Disabled
Port C
Default Setting
Disabled 49 Thermal Overload Protection
Disabled 66 Startup Counter for Motors
Disabled Load Jam Protection
Disabled 27, 59 Under/Overvoltage Protec-
tion
Disabled 81 Over/Underfrequency Protec-
tion
Disabled 25 Function group 1
Disabled 25 Function group 2
Disabled 25 Function group 3
Disabled 25 Function group 4
Disabled 50BF Breaker Failure Protection
Disabled 79 Auto-Reclose Function
Disabled 52 Breaker Wear Monitoring
Enabled Fault Locator
1 Section Line sections for fault locator
Disabled 74TC Trip Circuit Supervision
Disabled External Temperature Input
SIPROTEC, 7SJ62/64, Manual
C53000-G1140-C207-2, Release date 01.2008
Comments