Setting Notes - Siemens SIPROTEC 7SJ62 Manual

Multi-functional protective relay with local control

Hide thumbs Also See for SIPROTEC 7SJ62:

Table of Contents

Setting Notes

Setting the Function Parameter

The normal phase sequence is set at 209 (see Section 2.1.3). If, on the system side, phase rotation is reversed

temporarily, then this is communicated to the protective device using the binary input „>Reverse Rot."

SIPROTEC, 7SJ62/64, Manual

C53000-G1140-C207-2, Release date 01.2008

2.21 Phase Rotation