Siemens SIPROTEC 7SJ62 Manual page 473

DNP3.0 / MODBUS
RS485
DNP3.0 / MODBUS
Fiber Optical Link
Ethernet electrical
(EN 100) for IEC61850
and DIGSI
Ethernet optical (EN100)
for IEC61850 and DIGSI Connection for
SIPROTEC, 7SJ62/64, Manual
C53000-G1140-C207-2, Release date 01.2008
Connection for flush-mounted casing Rear panel, mounting location „B", 9-pin D-
Connection for surface-mounted
casing
Test Voltage
Transmission Speed
Maximum Distance of Transmission
FO connector type
Connection for flush-mounted casing Rear panel, mounting location „B"
Connection for surface-mounted
casing
Transmission Speed
Optical Wavelength
Laser Class 1 according to
EN 60825-1/-2
Permissible Optical Link Signal Atten-
uation
Maximum Distance of Transmission
Connection for flush-mounted casing rear panel, mounting location „B"
Connection for surface-mounted
casing
Test voltage (reg. socket)
Transmission speed
Bridgeable distance
Flush-mounted case
Connection for
Surface-mounted case
Transmission Speed
Optical wavelength
bridgeable distance
4.1 General Device Data
SUB miniature connector
at the housing mounted case on the case
bottom
500 VAC
up to 19,200 Bd
max. 0.62 miles (1 km)
ST–Connector Receiver/Transmitter
not available
up to 19,200 Bd
λ = 820 nm
using glass fiber 50/125 µm or using glass
fiber 62.5/125 µm
max. 8 dB, with glass fiber 62.5/125 µm
max. 0.93 miles (1.5 km)
2 x RJ45 socket contact
100BaseT acc. to IEEE802.3
in console housing at case bottom
500 V; 50 Hz
100 MBit/s
65.62 feet (20 m)
rear panel, mounting location "B", ST-con-
nector
100BaseT acc. to IEEE802.3
(not available)
100 MBit/s
1300 nm
max. 0.93 miles (1.5 km)
Technical Data
473