Siemens SIPROTEC 7SJ62 Manual page 417

Multi-functional protective relay with local control

Hide thumbs Also See for SIPROTEC 7SJ62:

Table of Contents

Input / Output Board C–I/O-11 (7SJ64)

The set nominal current of the current input transformers are checked on the input/output board C-I/O-11. The

jumpers X60 to X63 must all be set to the same rated current, i.e. one jumper (X61 to X63) for each input trans-

former of the phase currents and in addition the common jumper X60. The jumper X64 determines the rated

current for the input I

with sensitive ground fault current input there is no jumper X64.

For normal ground current inputs the jumper X65 is plugged in position "IE" and for sensitive ground current

inputs in position "IEE".

SIPROTEC, 7SJ62/64, Manual

C53000-G1140-C207-2, Release date 01.2008

C-I/O-11 input/output board with representation of jumper settings required for checking con-

figuration settings

and may thus have a setting that deviates from that of the phase currents. In models

Mounting and Commissioning

3.1 Mounting and Connections