Siemens SIPROTEC 7SJ62 Manual page 369

Multi-functional protective relay with local control

Hide thumbs Also See for SIPROTEC 7SJ62:

Table of Contents

The figure below shows an example of the synchronoscope with selection list, pie/bar chart and the current

measured values.

Figure 2-138

Web-Monitor Synchronoscope

All currently parameterized functions are shown in a list. An LED icon shows the current status of the selected

group: bright green (ON) for active, and dark green (OFF) for inactive. For an inactive function group, only the

parameter settings are shown, whereas for an active function group the current measured values are displayed

as well. On startup, the first active function group found is displayed automatically. All measured values are

read out directly in the device – about every 100 ms – and visualized in tables or diagrams.

SIPROTEC, 7SJ62/64, Manual

C53000-G1140-C207-2, Release date 01.2008

2.23 Auxiliary Functions