Siemens SIPROTEC 7SJ62 Manual page 422

Mounting and Commissioning
3.1 Mounting and Connections
Input/Output Board C–I/O-1 (7SJ64)
Figure 3-17
The selected control voltages of binary inputs BI8 to BI15 are checked according to Table 3-24. Jumper settings
for the contact mode of binary output BO6 are checked according to Table 3-25.
Figure 3-5 illustrates the assignment of the binary inputs to the mounting location.
422
Input/output board C-I/O-1 with representation of the jumper settings required for the board
configuration
SIPROTEC, 7SJ62/64, Manual
C53000-G1140-C207-2, Release date 01.2008