Siemens SIPROTEC 7SJ62 Manual page 414

Mounting and Commissioning
3.1 Mounting and Connections
Power Supply
Table 3-12
Jumper
X51
X52
X53
X55
1)
230 VAC only possible for release 7SJ64**-.../CC and higher
Live Status Contact
Table 3-13
Jumper
X40
Pickup Voltages of BI1 to BI5
Table 3-14
Binary Inputs
BI1
BI2
BI3
BI4
BI5
1)
Factory settings for devices with power supply voltages of 24 to 125 VDC
2)
Factory settings for devices with power supply voltages of 110 to 250 VDC and 115 VAC or 115 to 230 VAC
3)
Use only with pickup voltages 220 or 250 VDC
414
Jumper setting of the nominal voltage of the integrated power supply on the processor module
C-CPU-2
24 to 48 VDC
not used
not used
not used
not used
not changeable
Jumper position of the quiescent state of the live status contact on the C-CPU-2 processor
printed circuit board
Open in the quiescent state
1-2
Jumper settings of the Pickup Voltages (DC voltage) of the binary inputs BI1 to BI5 on the
C-CPU-2 processor board
Jumper
X21
X22
X23
X24
X25
Rated Voltage
60 to 125 VDC
1-2
1-2 and 3-4
1-2
not used
interchangeable
Closed in the quiescent state
2-3
1)
19 VDC Pickup 88 VDC Pickup
1-2
1-2
1-2
1-2
1-2
C53000-G1140-C207-2, Release date 01.2008
110 to 250 VDC,
115 to 230 VAC
2-3
2-3
2-3
1-2
Presetting
2-3
2)
176 VDC Pickup
2-3 3-4
2-3 3-4
2-3 3-4
2-3 3-4
2-3 3-4
SIPROTEC, 7SJ62/64, Manual
1)
3)