Siemens SIPROTEC 7SJ62 Manual page 367

It is recommended to block the control via the Web Monitor. This can also be achieved by setting "Read Only"-
access for the interface via which the Web browser accesses the device. This parameter can be accessed in
DIGSI via "Interfaces - Operator Interface on Device" (for access via serial interface) or via "Interfaces - Ether-
net on Device" (for access via the Ethernet interface, see the following figure).
Figure 2-136
As an example for the basic functionality, the figure below shows messages of the event log of the device in
the form of a list. These messages are displayed with their short text stored in the device.
SIPROTEC, 7SJ62/64, Manual
C53000-G1140-C207-2, Release date 01.2008
Setting the Web Monitor authorization for acces via Ethernet interface
Functions
2.23 Auxiliary Functions
367