Siemens SIPROTEC 7SJ62 Manual page 419

Jumper Settings Input/Output Board B-I/O-2
The layout of the PCB for the input/output module B–I/O–2 is illustrated in figure 3-16.
Figure 3-16
The selected pickup voltages of the binary inputs BI8 to BI20 (with housing size
Table 3-20. BI8 to BI33 (with housing size
Figures 3-5 and 3-6 illustrate the assignment of the binary inputs to the module slot.
SIPROTEC, 7SJ62/64, Manual
C53000-G1140-C207-2, Release date 01.2008
Input/output board B-I/O-2 with representation of the jumper settings required for the
board configuration
1
/ ) are checked according to Table 3-21.
1
Mounting and Commissioning
3.1 Mounting and Connections
1
/ ) are checked according to
2
419