Advertisement
Section 2: Setting the Relay Using Reydisp Evolution
Reydisp software provides a pc tool which can be used for programming of protection configuration and settings
and the mapping of hardware input and outputs using a graphical interface. It is supplied with additional tools for
configuration of serial communication protocol data objects, configuration of text for international language
support
and programming of user specific time current curves.
communication port the user will need the following:-
PC with Reydisp installed. (This can be download from our website www.energy.siemens.com.
Configuration and download of IEC 61850 data and programming of graphical user logic requires the use of the
Reydisp Manager software which is supplied with online instructions and help and is not documented here.
2.1
Physical Connection
The relay can be connected to Reydisp via any of the communication ports on the relay. Suitable communication
Interface cable and converters are required depending which port is being used.
2.1.1
Front USB connection
To connect your pc locally via the front USB port.
©2013 Siemens Protection Devices Limited
Chapter 2) 7SR23 DAD Settings, Configuration & Instruments Guide
Figure 2-1
USB connection to PC
To configure the relay using a serial
Chapter 2 Page 12 of 18
Advertisement
Chapters
