Set Available Languages In The Login Screen - Polycom RealPresence 1800 Getting Started Manual

L R P C
OGIN TO EAL RESENCE OLLABORATION
S
ET AVAILABLE LANGUAGES IN THE

Set available languages in the Login Screen

58
S
ERVER
L S
OGIN CREEN
2. Start the Web Client application on the workstation.
a In the Web browser's address line, enter the IP address of the MCU as
assigned to it by the DHCP or as you assigned to it (if a DHCP is not
configured in your environment) in the format: http://<MCU IP
Address>.
A
DDITIONAL
Edition, you must enter https://<Control Unit IP Address>.
b Click Enter.
A
DDITIONAL
Solve the browser environment error
If the error "Browser environment error. Please close all the browser sessions"
appears, close all the browser sessions, and reconnect to the MCU. If the error
message appears again, either run the automatic troubleshooter utility or manu-
ally preform the suggested troubleshooting procedures.
3. In the RealPresence Collaboration Server Web Client Login screen, enter
the default Username (POLYCOM) and Password (POLYCOM) and click
Login.
By default, the Collaboration Server Web Client interface is displayed only in
English. However, the system administrator can choose the languages available
for selection on the Login screen. These languages are represented by flags.
T
ASK
To set available languages in the Login screen:
1.
P
OLYCOM
I : For RealPresence Collaboration Server Virtual
NFORMATION
I : The Web Client Login screen is displayed.
NFORMATION
P R P C
OLYCOM EAL RESENCE
R P C
EAL RESENCE OLLABORATION
S G
OLLABORATION ERVER ETTING
S .8.6
ERVER V
S G
TARTED UIDE