Testing The Smart Call Home Configuration; Verifying The Smart Call Home Configuration - Cisco Nexus 7000 Series Configuration Manual

Testing the Smart Call Home Configuration

Testing the Smart Call Home Configuration
You can generate a test message to test your Smart Call Home communications.
Procedure
Step 1
Step 2
Step 3
Step 4
Step 5

Verifying the Smart Call Home Configuration

To display Smart Call Home configuration information, perform one of the following tasks:
Command
show callhome
show callhome destination-profile name
show callhome merge
Cisco Nexus 7000 Series NX-OS System Management Configuration Guide
130
Command or Action
configure terminal
Example:
switch# configure terminal
switch(config)#
callhome
Example:
switch(config)# callhome
switch(config-callhome)#
callhome send [configuration | diagnostic]
Example:
switch(config-callhome)# callhome send
diagnostic
callhome test
Example:
switch(config-callhome)# callhome test
copy running-config startup-config
Example:
switch(config)# copy running-config
startup-config
Configuring Smart Call Home
Purpose
Enters global configuration mode.
Enters Smart Call Home configuration
mode.
Sends the specified Smart Call Home test
message to all configured destinations.
Sends a test message to all configured
destinations.
(Optional)
Copies the running configuration to the
startup configuration.
Purpose
Displays the Smart Call Home
configuration.
Displays one or more Smart Call
Home destination profiles.
Displays the status of the last CFS
merger for Smart Call Home.