Associating An Alert Group With A Destination Profile - Cisco Nexus 7000 Series Configuration Manual

Configuring Smart Call Home
Step 7
Step 8
Step 9
Step 10
What to Do Next
Associate one or more alert groups with a destination profile.

Associating an Alert Group with a Destination Profile

Procedure
Step 1
Step 2
Step 3
Command or Action
destination-profile {name | CiscoTAC-1 |
full-txt-destination | short-txt-destination}
message-size number
Example:
switch(config-callhome)#
destination-profile full-txt-destination
message-size 100000
commit
Example:
switch(config-callhome)# commit
show callhome destination-profile [profile name]
Example:
switch(config-callhome)# show callhome
destination-profile profile
full-text-destination
copy running-config startup-config
Example:
switch(config)# copy running-config
startup-config
Command or Action
configure terminal
Example:
switch# configure terminal
switch(config)#
callhome
Example:
switch(config)# callhome
switch(config-callhome)#
destination-profile {name | CiscoTAC-1 |
full-txt-destination | short-txt-destination}
Cisco Nexus 7000 Series NX-OS System Management Configuration Guide
Associating an Alert Group with a Destination Profile
Purpose
Configures the maximum message size for this
destination profile. The range is from 0 to
5000000. The default is 2500000.
Commits the Smart Call Home configuration
commands.
(Optional)
Displays information about one or more
destination profiles.
(Optional)
Copies the running configuration to the startup
configuration.
Purpose
Enters global configuration mode.
Enters Smart Call Home configuration
mode.
Associates an alert group with this
destination profile. Use the All keyword
121