Verifying The Netflow Configuration - Cisco Nexus 7000 Series Configuration Manual

Verifying the NetFlow Configuration

Verifying the NetFlow Configuration
To display the NetFlow configuration, perform one of the following tasks:
Command
show flow exporter [name]
show flow interface [interface-type slot/port]
show flow record [name]
show flow record netflow layer2-switched input
show flow timeout
show sampler [name]
show hardware ip flow
show running-config netflow
Monitoring NetFlow
Use the show flow exporter command to display NetFlow statistics. Use the clear flow exporter command
to clear NetFlow flow exporter statistics.
Configuration Examples for NetFlow
This example shows how to configure a NetFlow exporter configuration for IPv4 :
feature netflow
flow exporter ee
version 9
flow record rr
match ipv4 source address
match ipv4 destination address
collect counter bytes
collect counter packets
Cisco Nexus 7000 Series NX-OS System Management Configuration Guide
388
Purpose
Displays information about NetFlow flow exporters
and statistics. You can enter up to 63 alphanumeric
characters for the flow exporter name.
Displays information about NetFlow interfaces.
Displays information about NetFlow flow records.
You can enter up to 63 alphanumeric characters for
the flow record name.
Displays information about the Layer 2 NetFlow
configuration.
Displays information about NetFlow timeouts.
Displays information about NetFlow samplers.
You can enter up to 63 alphanumeric characters for
the sampler name.
Displays information about NetFlow hardware IP
flows.
Displays the NetFlow configuration that is currently
on your device.
Configuring NetFlow