Displaying Call Home Configuration Information - Cisco Catalyst 4500 series Administration Manual

Displaying Call Home Configuration Information

Displaying Call Home Configuration Information
To display the configured Call Home information, perform these tasks:
Command
Switch# show call-home
Switch# show call-home detail
Switch# show call-home alert-group
Switch# show call-home mail-server status
Switch# show call-home profile {all | name}
Switch# show call-home statistics
Examples
Example 68-1 Configured Call Home Information
Switch# show call-home
call home feature : disable
Available alert groups:
Profiles:
Switch#
Software Configuration Guide—Release IOS XE 3.6.0E and IOS 15.2(2)E
68-14
68-1 to 68-7 show the results when using different options of the show call-home command.
call home message's from address: switch@example.com
call home message's reply-to address: support@example.com
vrf for call-home messages: Not yet set up
contact person's email address: technical@example.com
contact person's phone number: +1-408-555-1234
street address: 1234 Picaboo Street, Any city, Any state, 12345
customer ID: ExampleCorp
contract ID: X123456789
site ID: SantaClara
source ip address: Not yet set up
source interface: Not yet set up
Mail-server[1]: Address: smtp.example.com Priority: 1
Mail-server[2]: Address: 192.168.0.1 Priority: 2
Rate-limit: 20 message(s) per minute
Keyword
------------------------ ------- -------------------------------
configuration
diagnostic
environment
inventory
syslog
Profile Name: campus-noc
Profile Name: CiscoTAC-1
Purpose
Displays the Call Home configuration in summary.
Displays the Call Home configuration in detail.
Displays the available alert groups and their status.
Checks and displays the availability of the
configured e-mail server(s).
Displays the configuration of the specified
destination profile. Use the keyword all to display
the configuration of all destination profiles.
Displays the statistics of Call Home events.
State Description
Disable configuration info
Disable diagnostic info
Disable environmental info
Enable inventory info
Disable syslog info
Chapter 68 Configuring Call Home
OL_28731-01